Ziller Electric Inc | Interactive Generac Generator Forum  

Go Back   Ziller Electric Inc | Interactive Generac Generator Forum > Generac Generator Tech Talk > Generac Air Cooled Generators

ZillerElectric.com Generac Guardian 22kW 7043 Generator Generac iQ2000 2000 Watt Inverter Generator

Generac Air Cooled Generators Troubleshooting Questions, Answers, and Information About Air Cooled Guardian Generators

Reply
 
Thread Tools Display Modes
Old December 8th, 2013   #1
Mark_M
Junior Member
 
Join Date: Dec 2013
Posts: 2
Default

I have a new Generac 7 kW generatort hat came with the panel designed for power failure back up. I am not using the switch gear and am trying to hook it up to a off-grid solar system to charge the batteries when there is not enough sun. It has the Evolution controller, I have found all the information to hook up the nexus controllers to a 2-wire start but am unable to find anything on the Evolution controller, the generator serial # is 8298*** and the model # is 0062370. I am wanting to start it with my Xantrex AGS. Any information would be very much appreciated.

Thanks in advance

Last edited by Geoff Z; December 9th, 2013 at 07:11 AM.. Reason: Skip combined two posts, Kelly removed serial number
Mark_M is offline   Reply With Quote
Old December 9th, 2013   #2
Mark_M
Junior Member
 
Join Date: Dec 2013
Posts: 2
Default

Thanks for that information on programming the controller but do you know were to attach the 2 wires on the control panel, (pin location)
__________________
Mark
Mark_M is offline   Reply With Quote
Old December 10th, 2013   #3
GenMan
Senior Member

 
Join Date: Jan 2012
Location: Codrington , Ontario
Posts: 573
Default

sent you an email
GenMan is offline   Reply With Quote
Old February 1st, 2014   #4
Ryansmeed
Junior Member
 
Join Date: Feb 2014
Posts: 2
Default also 2wiring a guardian…. help!

Quote:
Originally Posted by Mark_M View Post
Thanks for that information on programming the controller but do you know were to attach the 2 wires on the control panel, (pin location)
Mark, where did you attach the 2 wires? I need to 2wire start a 11k guardian w/ evolution controller. i want to control it from an outback mate.
Ryansmeed is offline   Reply With Quote
Old 3 Weeks Ago   #5
rentschler
Junior Member
 
Join Date: Jan 2017
Posts: 2
Default two wire Start evolution

Would you please tell me the pin out to two wire start a evolution controller?
contact me at Rentschler at zianet dot com

Last edited by SkipD; 3 Weeks Ago at 07:14 AM.. Reason: Hiding email address from web "bots"
rentschler is offline   Reply With Quote
Old 3 Weeks Ago   #6
Chris Flagg
Forum Administrator

 
Chris Flagg's Avatar
 
Join Date: Feb 2016
Posts: 1,023
Default

Quote:
Originally Posted by rentschler View Post
Would you please tell me the pin out to two wire start a evolution controller?
contact me at Rentschler at zianet dot com
This thread is a bit old, but see this one. There's a link towards the bottom with some information. That link is not from our site and is a PDF I believe. http://zillerstore.com/forums/showth...n+2+wire+start
__________________
Ziller Electric - Service Manager, Lead Technician
Zillerelectric.com
888-2-ZILLER
Chris Flagg is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:51 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright ©1985-2016 Ziller Electric Inc
Ziller Electric Inc is not representing Generac Power Systems Inc